Tabla de contenido
Idiomas disponibles
Idiomas disponibles
VOLUME ADJUSTMENT
During single image modes, the volume can be adjusted using the + and - buttons on the monitor or the < and > buttons on the remote to change the audio channel
selected.
During split/quad image modes, the audio for each camera may be toggled on or off through the split-audio menu option. See below for details. Once a camera's audio
has been toggled on, the volume can be adjusted using the + and - buttons on the monitor or the < and > buttons on the remote.
SELECTING SPLIT CAMERA VIEW
Press the S button on the monitor until split view CAM1 and CAM2 appears on the screen. Press + or - on the monitor (or < or > on the remote control) to cycle
through all the split camera views.
SPLIT/QUAD IMAGE OVERRIDE SELECTION
To select the yellow trigger override, press the S button until split view CAM1 and CAM2 is on the screen. Apply and hold power to yellow trigger wire and press
the + or - button on the monitor (< or > on the remote) to cycle through all split camera views, including quad view. When desired split or quad override view is
found, remove yellow trigger wire from power. Wait for camera view to reset. Press S to change to camera view and return to normal viewing mode. Touch the
yellow trigger wire to power wire to test if the trigger override is working properly. This view will override all standard views when power is applied to yellow.
MENU OPTIONS
Press M (or MENU on the remote) to display the following options and settings:
1. PICTURE
5. AUTOSCAN
2. SPLIT-AUDIO
6. SYSTEM
3. MIR-FLIP
7. PLAY
4. RECORD
8. PAIRING
Note: The MENU is only accessible during the single image modes.
MENU OPTION: PICTURE
IMAGE MODE OPTIONS
Using the monitor:
1. Press S to enter the single image mode to be adjusted.
2. Press M to enter the Menu
3. Use the + or - to highlight the PICTURE Option
4. Press the down arrow to enter the PICTURE Option
5. Use the + or - to highlight the desired adjustment
6. Press the down arrow to enter the adjustment option
7. Use the + or - to change the settings
8. Press the down arrow to exit the adjustment option
9. Press M twice to return to the main screen
Using the remote:
1. Press SEL to enter the single image mode to be adjusted
2. Press MENU to enter the Menu
3. Use the < or > to highlight the PICTURE Option
4. Press OK to enter the PICTURE Option
5. Use the < or > to highlight the desired adjustment
6. Press OK to enter the adjustment option
7. Use the < or > to change the settings
8. Press OK to exit the adjustment option
9. Press MENU twice to return to the main screen
Page 6 of 11
Tabla de contenido
