Installation Instructions - General Electric PBM21 Instructivo Y Advertencias

Installation
Instructions
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
for local inspector's use.
IMPORTANT
codes and ordinances.
Note to Installer Be sure to leave these
instructions with the Consumer.
Note to Consumer
Skill level
Completion time
your dealer, go the last page of this manual to
identify your local provider Serviplus.
Save these instructions
Observe all governing
Refrigerator
Models PBM21, ABM21, PDM21,
PNM25, PDM25, PFM25
3/32", 1/8" and 3/16"
Allen wrenches
WARNING
Models: PBM21, ABM21.
WARNING - To avoid any risk as a result of the instability
of the device, it must be fixed according to instructions:
Anti-tip kit must be install this in order to prevent instability
on the refrigerator.
This anti-tip kit must be installed following the given
instruction on the anti-tip (200D9341P003). If the
refrigerator it is moved from its position it is necessary
once again follow the installation instructions provided
on the anti-tip kit this to assure the correct installation.
If the swing of the door is changed (reversibility) it is
necessary that the anti-tip based support be install by
an authorized service agent, this to avoid any danger.
Note: The anti-tip based support must always be
located on the opposite side of the door hinge.
Important: If the previous warnings and steps are not
followed, you are completely responsible for any
personal or material harm that might occur with the
use of this refrigerator.
54
Torx T-20 Driver
Tip Over Hazard.