Tabla de contenido
Idiomas disponibles
Idiomas disponibles
5. Selecting remote control decoding type (by default: F)
This menu allows F Fixed Code (LUNA) or r Roller Code (IRIS, LIRA) decoding type to be selected to control automation.
CAUTION: Before changing the decoding type or personalising the code, first cancel all the programmed remote controls.
See the paragraph "CANCELLING REMOTE CONTROLS" to cancel the remote controls.
When personalising the code for Roller Code decoding, press the personalised emitter button (either by pressing the hidden button (LIRA) or
by bridging Pins 1 and 5 (IRIS) of the emitter) whilst r is flashing.
-
Press the
key,
the display shows
5
6. Open alarm (default: 0 – function deactivated)
If this function is activated, the device emits BEEPs for 30 seconds when the door remains open for longer than 10 minutes. The alarm is
repeated every 10 minutes. Close to door to interrupt the alarm.
-
Press the
key,
the display shows
6
7. Automatic closure (default: 0 – function deactivated)
If this function is activated, the device automatically closes the door after the set period of time.
Prior to closing the door, the device emits BEEPs for 3 seconds.
-
Press the
key,
the display shows
7
Select the desired pause time using the + and – keys
Press the
key:
flashes
F
to indicate Fixed Code
decoding.
Press the
key:
0
flashes
to indicate that the function
is deactivated
Press the
key:
0
flashes
to indicate that the
function is deactivated
Press the + or – key
r
to select
Roller Code
F
or
Fixed Code.
Press the + key to activate
the function: the display
shows
I
Press the + key to activate
the function: the display
shows
I
corresponding to
30 seconds
Press the
the settings: the display
33
Press the
key to save
the settings: the display
shows
5
Press the
key to save
the settings: the display
shows
6
key to save
shows
7
Tabla de contenido
