Operation - Craftsman 315.115860 Manuel Del Operador

Inflador portátil de 19,2 v con manómetro digital
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

WARNING:
Do not allow familiarity with products to
make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious
injury.
WARNING:
Always wear eye protection with side
shields marked to comply with ANSI Z87.1. Failure to
do so could result in objects being thrown into your
eyes, resulting in possible serious injury.
WARNING:
Do not use any attachments or acces-
sories not recommended by the manufacturer of this
product. The use of attachments or accessories not
recommended can result in serious personal injury.
WARNING
: The handheld inflator is capable of
inflating to 200
psi, 13.7 BAR, or 14 kg/cm
avoid over inflation, carefully follow instructions on
items to be inflated. Never exceed recommended
pressures. Use only recommended air handling parts
acceptable for pressures not less than 200 psi.
CAUTION
: Do not leave items to be inflated
unattended while handheld inflator is in use. These
items can burst and could cause serious injury.
WARNING
: The handheld inflator is not designed to
inflate large volume items such as boats, pools, rafts,
large air beds, etc. It is also not designed for com-
mercial application.
WARNING
: Since the pressure display is not cali-
brated, and is therefore not binding for exact values,
tire pressure must be checked using a calibrated
measuring device before driving a vehicle with ve-
hicle tires inflated with the handheld inflator.
WARNING
: Risk of injury-do not direct air stream at
body.
WARNING
: Hot surface-to reduce risk of burns do
not touch metal clamps of hose assembly.
APPLICATIONS
You may use this tool for the purposes listed below:
Inflating sports balls, tires, floats, and toys
For complete charging instructions, refer to the Operator's
Manual for the battery packs and chargers listed in the
General Safety Rules.
BATTERY PROTECTION FEATURES
Craftsman
19.2 V lithium-ion battery packs are designed
®
with features that protect the lithium-ion cells and
maximize battery life.

OPERATION

If the product stops during use, release the trigger to reset
and resume operation. If the product still does not work,
the battery needs to be recharged.
TO INSTALL BATTERY PACK
See Figure
 Place battery pack in the handheld inflator. Align raised rib
on battery pack with groove inside handheld inflator.
CAUTION:
product, be sure raised rib on battery pack
aligns with groove inside handheld inflator and
latches snap into place properly. Improper as-
sembly of battery pack can cause damage to
internal components.
 Make sure the latches on each side of the battery pack
snap in place and battery pack is secured in product
max. To
2
before beginning operation.
WARNING:
product when you are assembling parts, making
adjustments, cleaning, or when not in use. Remov-
ing battery pack will prevent accidental starting that
could cause serious personal injury.
TO REMOVE BATTERY PACK
See Figure
 Locate the latches on the side of the battery pack and
depress to release the battery pack from handheld inflator.
 Remove battery pack.
WARNING
can become detached under pressure and cause
serious injury. Possible air leaks can cause faulty
pressure readings. Make sure all connections are
tightly secured.
INSTALLING/REMOVING AIR HOSE
See Figure
 Remove battery pack.
 Loosen knob slightly by turning counterclockwise.
 Insert the end of the air hose into the open end of the
product.
 Push air hose inward until it stops.
 Tighten knob by turning clockwise.
 To remove, turn knob counterclockwise and remove air
hose.
8 - English
2, page
i.
When placing battery pack in the
Always remove battery pack from the
2, page
i.
: Improperly attached hoses or adaptors
3, page
i.
Tabla de contenido
loading

Tabla de contenido