Technical Specifications - Rane AC 23S Guia Del Usuario

Technical Specifications

Parameter
Crossover: Alignment
Slopes: (3-way)
Range: (3-way)
Range: (3-way)
Range: (2-way)
Time Delay Adjust Range
Inputs: Impedance
Maximum Level
Gain Range
Inputs: Type
Outputs: Type
Impedance
Maximum Level
Gain Range
Band Muting Switches
RFI Filters
Infrasonic Filter
Ultrasonic Filter
Frequency Response
THD+Noise
IM Distortion (SMPTE)
Signal-to-Noise Ratio
Maximum Power
Universal Line Voltage
Construction
Size (w x d x h)
Note: 0 dBu= 0.775 Vrms
Specifications are subject to change without notice.
Trademarks & Licenses
Rane is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries.
All other product names, company names, trademarks, or trade names are those of their respective owners.
Specification
Linkwitz-Riley
24 dB per Octave
70-1 kHz Low to Mid
190-7 kHz Mid to High
190-7 kHz Low to High
Off to +2
20k
+21
Off to +6
Active Balanced XLR
Active Balanced XLR
200
+20
Off to +12
Yes
Yes
20 Hz, 18 dB/Oct, Butterworth
40 kHz, 18 dB/Oct, Bessel
20-40 kHz
0.02
0.02
92
7
100-240 VAC, 50/60 Hz
All steel
19.0" x 5.3" x 1.8"
48.3 x 13.3 x 4.4 cm
Limit Units Conditions/Comments
Proprietary 4
41 detent continuously variable pot
as above
as above
5% ms Low & Mid outputs only
Ω
1%
1 dBu
-0/+4 dB
Pin 2 hot per AES standards
Pin 2 hot per AES standards
Ω
1%
600 Ω or greater
dBu
1
dB
-0/+4
Low and Mid outputs only
Hz
3%
Hz
3% Linear Phase
dB
+0/-3
%
.01 +4 dBu, 20 kHz noise bandwidth
%
.01 60 Hz / 7 kHz, 4:1, +4 dBu
dB
2 re +4 dBu, 20 kHz noise bandwidth
W
VAC 7W
th
-order state-variable
81