Averaging Measurement Mode - Fora P50 Manual Del Propietário

• If you press
• If the pulse rate symbol is shown as "
indicates that the monitor has detected an irregular heart beat.
• If the screen shows as below instead of blood pressure values, this
indicates that the meter has detected a big movement or great vibration(s)
of the arm during the measurement and cannot produce a
value. The meter will then re-pump automatically and take
another measurement. Please remain still while taking the
measurement.

► Averaging Measurement Mode

Always apply the pressure cuff before turning on the monitor.
Step 1
Press and hold
AVERAGE mode. Press
1 to 4) whose test reading will be stored in memory and press
confirm. Then the cuff will begin to inflate automatically.
20
during measurement, the monitor will be turned off.
for seconds. The monitor will turn on and enter the
to select user "
NOTE
" instead of " " , this
" (numbers from
to