Before Use; Care & Maintenance - Bladefish PoolJet AZ1 Manual Del Usuario

CARE and MAINTENANCE
1. After use drain the Pooljet of waster
2. Rinse the Pooljet with clean fresh water after use.
3. Ensure the charge port is free from dirt and debris.
Clean with mild soapy water if necessary and dry fully.
4. Charge the batteries at least once every three months
when not in use.
5. Do not attempt to repair the Pooljet Do not open the unit.
Return to authorised dealer for repair under warranty.
6. Do not dispose of the unit into household waste, fire or
water. Ni-Mh batteries are contained in the unit and should
be recycled once their lifespan is complete.
10

BEFORE USE

Battery Charging
1. Use only the battery charger supplied.
2. Use the correct plug type for your region.
3. Ensure the Pooljet is dry before charging.
4. Never allow the charger to get wet. For Indoor use only.
5. Avoid exposure to prolonged sunlight.
6. Charge only in temperatures between 0-40ºC.
7. Note: the battery may be supplied partially charged.
8. Plug the charger lead into Pooljet charger port.
9. Connect to mains power supply.
Connect to
mains power
supply
10. The LED indicators will light up RED while charging and
remain RED until the charger is unplugged.
Plug charger
lead into
charge port
7