Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Features
Transmitter
Front Panel
1.
Power On/Off: Press and hold this button to power the unit
on/off.
2.
Navigation Buttons: Press these buttons to change which
sections of the display are highlighted.
3.
Enter Button: Press and release this button to navigate to a
menu/submenu selection or confirm a specific function.
4.
Display: This will show the channel that the unit is
communicating on, pairing status, and battery level meter.
5.
Power/Signal LED: This LED flashes blue when the unit is
powered on but not paired. The LED illuminates solid blue when
the unit is powered on and paired.
6.
Low Battery LED: When the battery level is low, the display will
show a count-down from 120 seconds and this LED will flash red.
7.
Mic Input: Attach any dynamic microphone or battery-powered condenser
microphone with an XLR output here. Make sure it is seated and latched, and then
twist the threaded collar firmly up against the microphone's base to secure it.
To remove the microphone, twist the threaded collar away from the microphone's
base all the way to the transmitter body until the microphone is fully disengaged.
Side Panel
1.
Micro USB Port: Connect a USB power adapter (sold separately) here
to power the unit if not using 2 AA batteries.
Rear Panel
1.
Battery Compartment: Insert (2) AA batteries here (not included), and
make sure the positive (+) and negative (–) poles are facing the proper
directions. Alkaline batteries are recommended. Always replace both
batteries, and do not mix battery types.
4
1
4
5
1
2
2
1
3
7
6
5
4
2
1
3
6
5
1
2
3
1
5
1
1
Tabla de contenido
