Initial Use - MALONE GTX-5 Manual De Instrucciones

Make sure the power switch is set to OFF position before you connect the device. Make sure all connections are made
properly in order to avoid hiss.
• Adjust the volume: turn the VOL/MULTI knob or use VOL+/- on the RC.
• Select the signal input source: press INPUT repeatedly to select AUX/USB/BT ot FM (tuner).
• Press MENU, then VOL/MULTI (or MENU/ADJUST on the RC) to adjust treble, bass, or microphone effect.
• Press MUTE to toggle mute on/off.
• Press LIGHT repeatedly to toggle the light effetcs on/off.
• Initially, connect the supplied antenna to the correspondingly marked connection jack on the rear.
• Press INPUT to change to FM mode. The current frequency is schown on the display.
• Use the TU+/- buttons to scan for stations (hold for an automatic scan in the desired direction; press for manual
search in steps of 0.05MHz.)
• To save the current station to presets, press MEMORY, then press the desired number button on the RC. To recall,
simply press the corresponding number button, or use
• Connect the microphones to the MIC1 / MIC2 / MIC3 input jacks. The device automatically notices when micropho-
nes are connected. Use VOL+/- or VOL/MULTI to adjust the volume.
• Press MENU to adjust the microphone volume (MV) as well as the echo effect (EC).
• Use MIC 3 VOL on the rear to adjust the volume for microphone 3.
• Press INPUT to change to USB mode. Connect a compatible USB drive containing audio files to the USB slot.
• Use , , and
• Press INPUT to change to BT mode. The flashing BT LED indicates the device is in pairing state.
• Activate BT on your BT device (smartphone/tablet/laptop PC) and pair with 10026820.
• When propted to enter a password, enter "0000".
• The BT LED lights continuously when the connection attempt was successful.
• Use your external media device to operate the playback.
Operation
, to navigate through your media library.

Initial Use

Basics
Radio
/ .
Karaoke
USB
BT
15