Idiomas disponibles
Idiomas disponibles
• Move at a speed of about 1 minute every
10sq ft and follow the diagram for an even
finish (Fig.11).
• Do not leave the product operating in one area
for a prolonged period as this may damage
your floor.
• Once cleaning is complete, turn the unit off by
returning the handle to its upright position.
Polishing / buffing the floor
• Clean floor thoroughly first before adding your
chosen floor polish / wax
• If you are using an alternative floor polishing
wax or oil to Ewbank
refer to the manufacturer's instructions when
using with the Ewbank
• Start with the blue cleaning pads initially and
buff to a finish with the yellow pads for a
high-sheen finish.
• Keep the polisher moving. Do not stop in one
place for a long time or it will spoil the finish.
• Once polishing is complete, turn the unit off by
returning the handle to its upright position.
• A glossy finish may not always be possible; this
depends on the polish/wax used and the type of
floor surface. Sometimes several coats of polish
will enable a glossy finish.
Power Cable Storage
• The electrical power cable can be stored on the
rear of the product using the convenient power
cable storage hooks.
Floor Polish, please
®
Floor Polisher EP170.
®
Fig.11
(approx. 1minute per 10 sq ft)
6
3.3ft
3.3ft
