Idiomas disponibles
Idiomas disponibles
Use the self-test to verify both the operation of the UPS and the
condition of the battery. In normal utility power, push the Power ON/OFF/Test
self-test, the UPS runs in Backup Mode. If the UPS passes the self-test, it
returns to "Ac Input Normal" operation.
To ensure the remote ON/OFF function, connect a remote
terminal as shown below.
The remote switch provides the same functions as the front panel switch
including ON/OFF/Test functions with Green Mode enabled or disabled. If the
Green Mode is not needed, a remote toggle switch can be used.
When in ON Battery Mode, the yellow LED illumi-
nates and the UPS sounds an audible alarm. The alarm stops when the UPS
returns to Ac Input Normal operation.
In ON Battery Mode when the battery energy
runs low, the UPS beeps rapidly until the UPS shuts down from battery
exhaustion or returns to Ac Input Normal operation.
When the UPS is overloaded (the connected
loads exceed the maximum rated capacity), the UPS sounds a continuous
alarm and LED to warn of an overload condition. Reduce the load to eliminate
the overload.
English version
