Elko EP SHT-6 Manual Del Usuario página 5

ELKO EP, s.r.o.
Palackého 493
769 01 Holešov, Všetuly
Czech Republic
Tel.: +420 573 514 211
e-mail: [email protected]
www.elkoep.com
Made in Czech Republic
02-25/2017 Rev.: 2
Characteristics
Time switch with DCF control is used for the automatic real-time controlling of appliances. The
timer operates all year round without the need for continuous maintenance, with minimum op-
erating costs and maximum savings of electrical energy (for example for turning on heating,
pumps, ventilators, public lighting etc.). Appliances can be controlled in regular time cycles or
based on a pre-set programme.
Time switch SHT-6 is synchronized by a DCF77 signal using external receiver DCRF-1. Time switch
can operate independently without a DCF receiver. In the case of a power supply interruption,
the timer retains all set values required for its reliable activation after power is restored.
- Switching modes:
- Auto - automatic switching mode:
- Programme
- switching based on a programme (astro or time).
- Random
- switches randomly in a 10-120 minute interval.
- Holiday  - holiday mode - option of setting up a period for which the timer will be blocked,
i.e. will not switch based on the set programmes.
- Manual
- manual mode - option of controlling the individual output relay manually
- Options of the automatic switching programme:
- Time programme - switching based on a pre-set time programme
- Memory capacity for 100 time programmes.
- Programming can be performed both when power is on or in backup mode.
- Output relays only operate with a supply voltage of AC 230 V.
- Menu display selection - CZ / SK / EN / ES / PL / HU / RU (default factory setting EN).
- Selection of automatic switching between summer / winter time based on location.
- Backlit LCD display.
- Simple and easy setup using 4 control buttons.
- Sealable transparent cover on the front panel.
- The timer has a backup battery that preserves data in case of a power supply failure (reserve
backup time up to 3 years).
- Supply voltage: AC 230 V.
- 2-module, mounted onto a DIN rail, clamping terminals.
- After plugging the timer in for the fi rst time, the current time, date and geographic location
must be set for correct operation of the clock.
Settings can be done:
- manually: only if the DCF signal is disabled
- automatically: if the receiver DCFR-1 is connected and DCF signal is enabled.
Symbol
DCF
B1 B2 A1 16 18
A2 15
cos φ ≥ 0.95
Type of load
AC1
Mat. contacts AgSnO ,
2
contact 16A
250V / 16A
Type of load
AC13
Mat. contacts AgSnO ,
2
contact 16A
x
Connection
N
A1 G B1 B2
DCFR-1
A2 16 15 18
L
↯
Sensing sensor on potential network
mains supply voltage.
M M
AC2 AC3 uncompensated
250V / 5A 250V / 3A 230V / 3A (690VA)
K
AC14 AC15
250V / 6A 250V / 6A
SHT-6
Time switch with DCF control
Description
1
2
3
4
5
1. Supply voltage terminal (A1)
2. Display with back-light
3. Place for seal
4. Plug-In with battery backup
5. Supply voltage terminal (A2)
6. Connectors for the DCFR-1 receiver
7. Control buttons
8. Output - channel (16-15-18)
9. Indicates the day in the week
10. Indication
11. Indication of date / setting menu *
CONTROL OF A DISPLAY WITH BACKLIGHT
Power on: Display is illuminated with a backlight for 10 seconds from the last button press. The
display continuously shows the settings - date, time, day of the week, contact state and pro-
gramme. Permanent on / off is activated by simultaneous presses of the MAN, ESC, OK buttons.
After activating the permanent on/off , the display will fl ash briefl y.
Backup mode: After 2 minutes, the display switches to the sleep mode, i.e. shows no information.
The display can be activated by pressing any button.
* Displaying the date or status of DCF signal (switches after 4 s) status of DCF signal:
Prohibited DCF reception: DCF Flashes OFF
Allow DCF reception: good signal - DCF OK
** If the time is not set, the time indication is fl ashing. If the time is set (manually or automatically),
the time indication lights permanently.
Mode precendence
Mode precedence
mode with the highest priority
AC5a
AC5a
compensated
230V / 3A (690VA)
to max. input C=14uF
M
DC3
DC1
24V / 3A
24V / 10A
1/4
6
9
10
11
12
7
13
14
15
8
12. Time display **
13. Control button PRG / +
14. Reset
15. Control button MAN1 / -
16. Operating modes indication
17. 12/24 hours format /
sunset - sunrise
18. Indication of the switch program
19. Control button MAN2 / ESC
20. Control button OK
bad or no signal - DCF BAD
Display
 ON / OFF
 ON / OFF 
 ON / OFF
HAL.230V
AC5b AC6a
1000W x
M
DC5 DC12
24V / 2A 24V / 6A
EN
16
Auto Prog Man
17
18
SHT-6
19
20
Output mode
manual control
holiday mode
time program Prog
AC7b AC12
250V / 3A x
DC13 DC14
24V / 2A x