Initial Use; Parent Unit - Inanny N30 Guía De Usuario

5. Initial use

Baby unit
Position the baby unit not in proximity to any other devices that may
cause interference.
Connect the round plug of the power adapter to the baby unit and the
other end to the electrical outlet.
The device automatically switches on.
The power LED will light up green.
To switch the device off, press the ON/OFF button for at least 2 seconds or
unplug the power adapter from the electrical outlet. The power LED will
then turn off.
To switch the device on again, press the ON/OFF button for approx. 2
seconds.

Parent unit

Plug in the battery cells into the parent unit battery compartment with the
orientation according to the polarity marked in the compartment.
Battery operation – charging
To ensure optimal safety, the parent unit is designed so that it can
only be operated with batteries inserted.
The battery must be charged for at least 16 hours before the device can
be first used.
Switch on the parent unit by pressing the
LED of the parent unit will light up green to indicate that the device is active.
If the parent unit battery is low and not connected to electrical outlet,
then the unit will beep twice. it will switch off automatically after a short
period. The power LED will turn off.
button for 2 seconds. The power
8