Factory Reset - Home Depot Home Decorators Collection SBMC01 Manual De Uso

Troubleshooting

FACTORY RESET

To perform a factory reset on the motor module, press and hold the button on the electronic endcap for 10 seconds. The button LED will blink
3 times alternating between red and blue. A factory reset will erase all calibration settings or programs/schedules that have been stored on the
motor module.
SBMC01 LED Displays
Mode
Low Battery
Error Mode
Pairing Mode
Successful Pairing
Receive Identity Command
Calibration Mode
Calibration Save
Save Favorite Position
Factory Reset
Charging (Adaptor only)
Color
Red 6 bpm
Red 175 bpm
Blue 60 bpm
Blue 600 bpm
Blue Solid blue/10 seconds
Blue 60 bpm
Blue Solid blue/5 seconds
Blue Blinks 3 times@150 bpm
Red/Blue Alternate red and blue blinking 3 times each
Red 25 bpm
9
End Cap LED
Indication Speed (Blinks Per Minute)
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.