Storage; Breakdown Solving - koban KEB-400C Manual De Uso

KEB-400C
Battery crimper

Storage

• Put the tool, charger and battery in a dry clean place. Please charge the
battery full once two months to make sure the life time. Clean the tool
and add some antirust oil on the metal parts, i.e. dies, dies holders before
storage.

Breakdown solving

• The crimper can not operate to the original position:
Please check if the hydraulic oil is enough or not. If not, please add the oil
full. Please check if there are any air/impurities inside the Oil Reservoir. If
yes, please let the air out or change a new Oil Reservoir. Please also check if
there is anything extra inside the main machine. Take it out.
• While operating, the speed is very slow:
Please check if there are any air/impurities inside the Oil Reservoir. If yes,
please let the air out or change a new Oil Reservoir. Please check if the
inner screws are all loosened. Please check the steel balls inside the main
machine are in correct position. If not, please send the tool back for further
support.
• Check if the battery has power:
Please check if the inner Ni-Plate/Ni-Plate Holder is all transformed or
broken or rusted. Please check the connecting points of battery & charger.
If there is any error, please replace the spare part.
Instructions manual |
A-Side
20
Check if the inner Ni-Plate/Ni-Plate
Holder is all transformed or broken
or rusted.
B-Side
www.grupotemper.com