General Electric JV535 Manual Del Usuario página 11

REMOVE EXHAUST ADAPTOR
2
Remove the 7" round exhaust adaptor from the top of
the hood. Set it aside along with its mounting screws.
NOTE: Save the screws for 3-1/4" x 10" rectangular
ducted installation, if that is your chosen venting option.
7" round
exhaust
adaptor
3 REMOVE FILTERS
Remove the protective shipping film from the edges
of the metal grease filters. Press the filter locks back
and lift the filters out. Set them aside.
Filters
Installation Instructions
11
4 REMOVE WIRING COVER
FROM THE JUNCTION BOX
Remove the wiring cover from inside the hood.
Set the cover and its mounting screw aside.
Wiring
cover
REMOVE WIRING KNOCKOUT
5
Remove either the top or the back wiring knockout as
needed and install an approved strain relief clamp.
Strain relief
clamp