Rear Panel; Audio Setup - Alesis CONTROL HUB Guia Del Usuario

Rear Panel

1. USB Port – Use the included USB cable to
connect Control Hub to your computer. This
connection will power Control Hub.

Audio Setup

Control Hub is a class-compliant device that can be used with any digital audio workstation or MIDI
sequencing software that supports USB class-compliant devices. To enable Control Hub to monitor
audio from your computer, follow the instructions below for your computer's operating system:
Windows 8:
1. Use the included USB cable to connect the Control Hub to your computer.
2. Go to the Start Menu, click the lower-left corner of the screen to go to the Desktop.
3. In the Taskbar, locate the Volume Control "Speaker" icon. Right-click the speaker and select
Playback Devices.
4. In the Windows Sound control panel select the Playback tab and select Control Hub as the
default device.
Windows 7:
1. Use the included USB cable to connect the Control Hub to your computer.
Go to Start Menu  Control Panel  Hardware and Sound  Sound.
2.
3. Click the Playback tab and select Control Hub as the default device.
Windows Vista:
1. Use the included USB cable to connect the Control Hub to your computer.
Go to Start Menu  Control Panel  Sound. (If you don't see Sound, select Switch to
2.
Classic View, and the Sound Control Panel should become available.)
3. Click the Playback tab and select Control Hub as the default device.
1
3
6
1
2
4
5
1 2