Pramac Powermate PMi1000 Manual Del Usuario página 45

Turn the switch of the engine to the "OPEN" position
g)
Turn the pulling pole of the air-blocking valve to the "CLOSE" position
h)
Note: when the engine is hot or the environmental temperature is relatively high,
do not use the air-blocking valve.
1 – Close
i) Pull the starting hold (fig. A) slightly until you feel the pressure, then
release the hold slowly by hand.
Look out
Do not let the starting hold (Fig. A) rebound, and release it slowly by hand.
2 – Pulling pole of the
air-blocking valve
-
3 - Close
45