Package Contents - CoCo SLV control ICS-1000 Guía De Instalación Rápida

EN

PACKAGE CONTENTS

First, please check if the package
contains the following items:
1. Internet Control Station
2. RJ-45 cable
3. Power adapter
4. Quick installation guide
1. CONNECT THE INTERNET CONTROL STATION TO YOUR MODEM/ROUTER
1. First, connect the Internet Control Station to the modem/router using the RJ-45 cable.
2. Then, connect the power adapter to the Internet Control Station and insert the plug of the power
adapter into a wall socket. The display of the Internet Control Station will illuminate.
3. The display will show the date and time on the first line and the letter "S" on the second line.
If this is not the case please check the following pages, otherwise continue to page 7.
4
1
2
2
2
1
4
4
CHECKLIST COMPLETE INSTALLATION
!
Before you can use the Internet Control Station,
please follow these necessary steps:
1. Connect Internet Control Station to your modem/router
2. Install the 'SLVcontrol' app on your smartphone or tablet
3. Create an account on www.coco-technology.com
4. Use the 'SLV control' app to register your smartphone/tablet with
the Internet Control Station
3
5. Create at least 1 room in the 'SLV control' app and add a lamp or
device to this room
6. Assign the transmission code for that lamp/device to the relevant
SLV receiver
2
On the second line of the display an "X" is shown instead of an "S"
Go to option CLOUD SERVER in the MENU of your 470801 (this option
will become available after pressing the topright green button multiple
times). At the option CLOUD SERVER, choose ON and wait until you see
the display with the date and time again. Additionally the letter "S" will now
appear.
The display shows the message CHECK CABLE
This message indicates that there is an issue with the RJ-45 cable. Make sure that this cable is connected
correctly. If this is indeed the case, try another cable or port on your router.
The display shows the message TIME NOT SET
This message indicates that your 470801 is not connected to internet. First, try to connect your 470801 on
another port of your router. If the message still appears afterwards you need to look at what is stated regarding
SERVER NO REPLY on the following page.
The display shows the message RESET ROUTER
As the message already indicates, you need to reset your router by unplugging the power adapter of your router
for a couple of secondes. Make sure the 470801 is not connected to your router as soon as you repower your
router. When your router is fully operational again, you can reconnect your 470801 with your router.
8
3
2A. DISPLAY INFORMATION IS NOT CORRECT
3
5
5