Channel Data Items - Vertex Standard VXR-7000 Manual De Instrucciones

Channel Data Items

Ch: Channel Number
This 2-digit number (01 - 16) is used to identify the chan-
nel. Channel numbers occur in sequence, and their or-
der can not be changed.
Rx Freq.: Edit Receive (or simplex) Frequency
Use the [0] - [9] keys to enter the desired channel fre-
quency directly, and press the [E
CTCSS Decoders: Toggle CTCSS Decoder ON/OFF, sets
CTCSS Frequency
Press the [S ] bar to
PACE
toggle the CTCSS Decoder
"on" or "off," or press the
[E ] key to display the
NTER
"T S " window,
ONE ELECT
from which you may select
a CTCSS frequency using the [A
] again to accept the selected tone, or press [E
TER
to cancel.
DCS Decoders: Toggle DCS Decoder ON/OFF, sets DCS
Code #
Press the [S ] bar to toggle the DCS Decoder ON or
PACE
OFF, or press the [E
NTER
" window, from which you may select a DCS code
LECT
using the [A
-
R
] key; press
ROW
[E ] again
NTER
to accept the
selected code,
or press the
[E ] key to
S C
cancel.
VXR-7000 FM R
EPEATER
CE27 Programming Software Instruction
] key.
NTER
] key; press [E
RROW
SC
] key to display the "C
ODE
CE27 Main Screen (Scrolled Right)
O M
PERATING
W/N: Wide/Narrow Channel Spacing
This function selects the channel spacing environment
in which the VXR-7000 operates.
W (Wide) =
N (Narrow) = 12.5 kHz Channel Spacing, ±2.5 kHz
Press the [S
PACE
ing environment.
Clk Sft: Enable/disable the CPU Clock Shift
This function is only used to move a spurious response
"birdie" should it fall on a current frequency.
Press the [S
PACE
NSQ Mode: Noise Squelch Mode
This command selects the manner of setting of the
Squelch threshold level.
User =
-
N
] key
Prpgm = The squelch threshold level determined via
Press the [S
PACE
NSQ Lv: Noise Squelch threshould level
S -
E
Use the [0] - [9] keys to enter the desired Squelch thresh-
old level directly, and press the [E
values are 0 (min.) ~ 255 (max.).
Court Blip: Courtesy Blip
When this parameter is set to "on," this function causes
the VXR-7000 to send out a "blip" on the portable/mo-
bile radio is frequency each time the portable radio is
unkeyed. This provides audible confirmation to the user
that the VXR-7000 was able to receive the transmission
from the portable.
Press the [S
PACE
ANUAL
25 kHz Channel Spacing, ±5 kHz De-
viation.
Deviation.
] bar to select the desired channel spac-
] bar to toggle "yes" or "no."
The squelch threshold level is fixed via the
"NSQ Lv" parameter (NSQ Lv: 0 [min.] ~
255 [max.]).
the dealer programming.
] bar to select the desired NSQ Mode.
NTER
] bar to toggle "on" or "off."
] key. Available
11