Cleaning And Maintenance - Gastrorag CM-1290B Manual De Instrucciones

EN

Cleaning and maintenance

1. Set the current time (8:10) by pressing "Hour" and "Min" buttons
repetitively. We use 24 hour time format.
2. Press "Prog" button once and the "Program'' indicator will blink
white.
3. Set the auto-start time (13:00) by pressing "Hour" and "Min"
buttons repetitively.
4. Press the "Prog" button again, the "Program" indicator will
illuminate white. After a while, the display will indicate the
current time.
NOTE: To cancel the delayed start press the "Prog" button
again. If you want to change the delayed start time, repeat the
steps 2-4 above.
5. At 13:00 the ON/OFF indicator will illuminate red and the coffee
maker will start brewing.
6. Once the brewing is finished, the coffee maker will enter the
keep warm mode for 2 hours. After that it will automatically
turn off the warming plate, while the display will show the
current time.
If you want to cancel the keep warm mode, remove the power
plug from the outlet.
NOTE: During brewing process, the "Prog", "Hour" and "Min"
buttons are disabled.
CLEANING AND MAINTENANCE
Always make sure to unplug the appliance and let it cool
down to room temperature before cleaning.
Do not treat your coffee maker with abrasive materials, sharp
objects, aggressive cleaners, gasoline, acids, alkalis or solvents.
Wipe the body of the appliance regularly with a clean, damp cloth or
sponge. Clean all detachable parts after each use in hot soapy water.
10