Basic Operation - Grandin LD19CHD106 CI Manual De Instrucciones

BASIC OPERATION

QUICK START GUIDE
• Connection
Connecting the mains and antenna.
1.
If TV has a power switch, turn it on firstly. Then press
2.
remote to turn on the TV.
• First Time Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in
configuring basic settings.
OSD Language: Press the
Display) language.
Mode Setting: Press the
Country: Press the
Auto Scan: Press the
LCN : Press the ◄/►
Turning on and off the TV
• Turn on the TV
Connect the AC input cable. If TV has a power switch, turn it on firstly. Press the
button on remote control can turn on TV from standby mode.
• Turn off the TV
Press the button on the remote control to enter standby mode.
Do not leave your set in standby mode for long periods of time. It is best to unplug
the set from the mains and aerial.
• No signal
There is No Signal menu on screen when there is no input signal. In ATV/DTV
mode, if there is no signal in 15 minutes, the TV will turn off automatically. In PC
mode, the TV set will automatically turn off in 5 minutes if no input signal. When
VGA cable is connected, the TV turns on automatically.
Programme Selection
• Using the CH+/CH- on the panel of TV or on the remote control.
Press CH+ to increase channel number.
Press CH - to decrease channel number.
• Using 0- 9 digital buttons.
You can select the channel number by pressing 0 to 9. (In ATV, DTV mode)
• Example
To select - channel (e.g. Channel 5): Press 5.
To select -- channel (e.g. Channel 20): Press 2 and 0 in a short time.
◄/► button to select the desired OSD (On Screen
◄/► button to select Home Mode or Store Mode.
◄/► button to select the country you want to.
◄/► button to select mode: DTV+ATV, DTV, ATV.
button to select On or Off.
Power button on the
English
GB-19