Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Chapter 7: Data Transmission
7.1 Basic operation of setup mode
When boot state, connect to the computer can enter the USB card reader
mode, also supports USB audio mode at the same time.
It can operate the file directly in the computer.
7.2 FAQs
--data transmission function can only use when the speaker already started up.
--if can not found storage device when connect with the computer.
First check weather the speaker is turned on, then check the USB cable, if
possible, try each USB port of your computer.
--if all USB port does not respond, you will need to reinstall the drives---USB
Composite Devece & USB Mass Storage Device. First uninstall those drives then use USB digital cable
to connect with your computer, it will automatically
reinstall these two drivers.
chapter8:Specifications
Category
Item
Version
Frequency
Bluetooth
Working Distance
communication protocol
Driver unit
RMS
Frequency
Auduio
SNR
Impedence
Distortion
Supported files Music format
Support
Memory Card
Card Reader
Battery
Power
Volt
Ports
Charge/Data port
P-6
Specifications
Bluetooth 2.0
2.4~2.48GHZ
10m
HS/HF,A2DP,AVRCP
50.8MM
3W
100HZ~18KHZ
S/N≥57DB
4.0Ω
THD≤11%
Mp3
TF Card
Card Reader function
Built-in rechargeable Li-on battery
DC 3.7V
Micro USB Port
Tabla de contenido
