Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INSTALLATION & OPERATION
A. INSTALLATION
Take out the beer cooler from its package. Place the beer
1.
cooler on a steady and horizontal surface, and make sure the
beer cooler is at least 5 inches/10 cm away from other
appliances or wall on each side so as to allow correct ventilation
on the appliances to get better performance.
Figure 6
Install the tap handle connect the tap, make sure both end fit
2.
together perfectly. (Show as Figure 6)
Set the water drip tray into the notch provided. (Show as
3.
figure 7)
Plug the beer cooler.
4.
Note: Do not connect or disconnect the electric plug when your
hands are wet. Before use it, make sure the voltage is conformity
with plug mark, and check whether the power cord is well
connected or not; if not, please don't use it, and call service center.
Handle
Drip tray
Faucet
Figure 7
Tabla de contenido
