USE WITH IN-FLIGHT SEAT
When using the device on board an aircraft, remove the connector
for the cigarette lighter socket by pressing the knurled clip, and at
the same time pulling outwards, to release the „air adapter" type
connector.
Connect the device to the socket, fi rst checking with the cabin staff
that this (in the case of use in „work" mode with the Computer
switched on) will not interfere with the fl ight Instruments.
WARNING!!! In certain cases, especially if you are recharging
a completely fl at battery, the device may heat up. This is normal:
avoid
bringing
als that are sensitive to heat or placing it in direct sunlight.
Repeat steps 5, 6, 7 and 8.
SAFETY DEVICES
•
Protection against excess current
•
Protection against excess voltage
•
Internal protection fuse
•
Anti-overheating device
•
Protection for short circuits
CERTIFICATION
•
Complies with FCC Class B specifi cations
•
Complies with RTCA D0-160D (FAA EMI) specifi cations
•
CE
•
E Mark
•
UL,CUL,CSA
•
TUV
•
FAA
•
ANSI, CISPR
the
adapter
DA-10213 Rev. 1.2
into
contact
with
materi-
11