Technical Data; Cleaning And Maintenance; Ordering Replacement Parts - HERKULES H-F 1000 Manual De Instrucciones

Polipasto de cadena
Ocultar thumbs Ver también para H-F 1000:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Anleitung_H_F_1000_SPK7:_
3. Proper use
The chain block is an appliance for the vertical lifting
and lowering of loads.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator - not the manufacturer -
will be liable for any damage or injuries caused as a
result thereof.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Max. holding diameter Fastening hook:
Max. holding diameter of the load hook:
Nominal hoisting capacity
Max. stroke height:
Size of load hoisting chain
(ISO 3077-T(8)):
Weight:
5. Before starting the machine
1. Before you lift a load with the chain hoist, you
should make yourself familiar with the "without
load" function of the chain hoist.
2. Make sure the chain hoist is securely fastened.
Be careful when choosing fastening points.
These points must be able to carry double the
load. If you are unsure as to whether the chosen
point is the right one, please choose a different
one.
3. The chain hoist should be fastened so that it
cannot change its position during operation.
4. The latch locks which are attached to the
fastening hook and the load hook must always be
closed during operation
14.05.2009
9:34 Uhr
Seite 7
6. Operation
6.1 Lifting the load
On the front side of the chain block there is an
engraved arrow pointing upwards, labelled "UP". Pull
the hand chain (2) on this side of the chain block in
order to lift the load.
6.2 Lowering the load
On the front side of the chain block there is an
engraved arrow pointing downwards, labelled "DN".
Pull the hand chain (2) on this side of the chain block
in order to lower the load.
7. Cleaning, maintenance and ordering
of spare parts

7.1 Cleaning and maintenance

1. In order to achieve the longest possible operating
efficiency and reliability of the chain hoist, remove
21 mm
dirt regularly from your chain hoist, grease the
19 mm
relevant parts thoroughly after use and store the
1,000 kg
hoist in a dry place.
2. Do not carry out any technical alterations or
2.5 m
repairs to the chain hoist; have these carried out
by an expert instead.
6 x 18 mm
3. The chain hoist must be regularly examined for
damage.
8.9 kg
4. The working order of the chain hoist is to be
checked regularly.

7.2 Ordering replacement parts:

Please provide the following information on all orders
for spare parts:
Model/type of the equipment
Article number of the equipment
ID number of the equipment
Spare part number of the required spare part
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The device is supplied in packaging to prevent its
being damaged in transit. This packaging is raw
material and can therefore be reused or can be
returned to the raw material system.
The appliance and its accessories are made of
various types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
GB
7
Tabla de contenido
loading

Tabla de contenido