Aigostar 8433325504038 Manual De Instrucciones página 10

GB
Before using new induction cooker
1. Read this guide, taking special note of the "safety Warnings"
section.
2. Remove any protective film that may still be on your ceramic
plate.
Using the Touch Controls
1. The controls respond to touch, so you don't need to apply any
pressure.
2. Use the ball of your finger, not its tip.
3. You will hear a beep each time a touch is registered.
4. Make sure the controls are always clean, dry, and that there is no
object (e.g. a utensil or a cloth) covering them. Even a thin film of
water may make the controls difficult to operate.
iii. OPERATION INSTRUCTIONS
1. Put the pot on the ceramic plate
--- Make sure the air vents are not blocked and keep utensils away
from the immediate surrounds of the ceramic plate.
--- Make sure the cookware which has food or liquid is placed in the
center of ceramic plate.
2. Plug in
--- After the power supply is connected, a beep will be heard. The
display shows "L", indicating that the induction cooker is in standby
15 07
mode.
3. Turn on
--- After pressing the "ON/STANDBY" button, the induction cooker
is ready for heating. Press the "Function" button, the induction
cooker enters heating mode.
--- After pressing the "ON/STANDBY" button, if no function button
is pressed for 10 seconds, the induction cooker will switch off
automatically.
--- After pressing the function button, if there is no proper pot on
the ceramic plate, the induction cooker will not heat up and the
alarm will sound to indicate that a pot is required. One minute later,
it will switch off automatically.
4. Function
--- After switching on the induction cooker, press "Function" button
to enter the temperature or level mode.
--- You can adjust the power level by pressing "+" or "-" button.
--- You can adjust the temperature by pressing "+" or "-" button.
5. Timer
--- Press the "Timer" button to enter the timer mode. When the
timer indicator lights up and the numbers blinks on the display,
press the "+" or "-" button to adjust the time duration. Adjustable
timer from 1 minute to 3 hours.
--- When the adjustment is finished, the number on the display will
be shown after blinking for several seconds. The induction cooker
starts counting sown.
--- The induction cooker will shut down when the default timer is
reached unless the user sets the timer himself.
6. Keep Warm
--- Press the "keep warm" button to maintain warmth. Under this
mode, the induction cooker heats the ingredients with gentle power
to maintain a certain temperature inside the pot.
Note: Under this mode, the power cannot be adjusted.
7. How to Lock
GB
16