Inmarsat Explorer 527 Manual Del Usario página 8

MAKING A USB CONNECTION
NOTE: The USB interface is intended for service use only!
If it is the first time you connect a computer to the transceiver using USB, you
have to install a driver first. Insert the Thrane & Thrane CD ROM provided with
your EXPLORER 527 into the CD ROM drive of your computer and install the
EXPLORER 527 USB driver.
To make a USB connection, do as follows:
1. Connect the USB cable between your computer and the EXPLORER 527
transceiver.
The connector on the transceiver is a USB Type A connector.
2. Start up the EXPLORER 527 as described in the beginning of this document.
3. Start up your terminal program.
You can now start an AT-shell and communicate with the EXPLORER 527 using
AT commands.
For information on supported AT commands, see the user Manual.
ACCESSING THE WEB INTERFACE
To access the web interface, do as follows:
1. Connect a PC to the EXPLORER 527 transceiver using the USB or LAN interface.
2. Start your Internet browser.
3. Enter the IP address of the web interface in the address field. The default IP
address is 192.168.0.1.
To see the IP address in the menu system, select
PROPERTIES>TERMINAL> IP ADDRESS.
The web interface now opens in your browser. For information on how to use the
web interface, refer to the User Manual enclosed on CD with the EXPLORER 527.