Troubleshooting - HoMedics AR-20 Manual De Instrucciones

5. Place the clean HEPA filter
back in the main unit, making sure
that it is firmly seated inside the unit.
Fig. 9
6. Place the tabs at the bottom of the
grill plate into the base of the unit.
Gently push the grill plate back into
place until you hear a click sound
indicating that the grill is firmly
latched.
DO NOT USE WATER OR ANY
Fig. 10
HOUSEHOLD CLEANERS OR
DETERGENTS TO CLEAN THE
HEPA FILTER.
It is recommended that you replace
the HEPA filter every 18 months to
maintain the optimal performance
of your air cleaner. To purchase the
HEPA replacement filter, go back to
your retailer (where you purchased
your air cleaner) or visit www.
homedics.com
12

Troubleshooting

Problem Possible Cause
Unit will not operate • Unit is not plugged in
• No power at unit
Reduced airflow or poor • The front grill may be
filtering blocked
• HEPA filter may be
clogged
Excessive noise • The unit is not level
Solution
• Plug unit in
• Press the POWER
button to turn the
power on
• Check circuits, fuses,
try a different outlet
• Check to make sure
nothing is blocking the
front grill and air outlet
• Check and clean filter
• Replace the filter
• Place the unit on a flat,
even surface
1 3