Chapter 7 - Installation - TECO 302 Serie Manual De Instrucciones

Avoid use of water, steam, solvent, varnish jets in the lift area where electric cables are
placed and, in particular, next to the electric panel.
6.9 risks resulting from improper lighting
Make sure all areas next to the lift are well and uniformly lit, according to local regulations.
6.10 risks of breaking component during operation
Materials and procedures, suitable for the designed
parameters of the lift, have been used by the manufacturer
to build a safe and reliable product. Operate the lift only
for the use it has been designed for and follow the
maintenance schedule shown in the chapter "Maintenance".
The presence of unauthorized persons next to the lift and
on the platforms is strictly forbidden during lifting as well
as when the vehicle has been already lifted.

CHaPTEr 7 - iNSTaLLaTioN

Only skilled technicians, appointed by the manufacturer, or by au-
thorized dealers, must be allowed to carry out installation. Serious
damage to people and to the lift can be caused if installations are
made by unskilled personnel.
106
Keep the area under and around the lift clean. Remove all oil spills.
6.8 Electrocution risks
6.11 risks for unauthorized uses
Any use of the lift other than that herein specified can cause serious
accidents to people in close proximity of the machine.
Fig. 13
Fig. 14
Operator's m anual