Tabla de contenido
ENTRANCE PANEL WITH KEYPAD CONFIGURATION INSTRUCTIONS
DESCRIPTION -
The entrance panel with keyboard and electronic directory leaves the factory with the following characteristics:
Ready to use:
- In a standard installation (building with a single entrance or access point)
- With pre-set operating characteristics (answering time, activation time of electric lock, etc.). See the factory default operating parameters
in "Operating Parameters" on page 28.
Lets you program the telephones/connection brackets of the building with any number between 1 and 999.
Lets the visitor make a call to a dwelling:
- By keying in the call code
- By selecting the name and surname of the resident-user of the dwelling in question (using "Search for resident")
Note: This requires that the relevant information be entered previously in the entrance panel. See "Electronic Directory" on page 33.
So that it will be even easier for the visitor to make the call, the entrance panels show a number of options on screen
These on-screen options are displayed in a pre-set language and in a certain way (text mode).
To learn more about the default options, language and text mode, see "Visitor: screens" on page 29.
If the factory default characteristics are not suitable for your particular installation, you can reconfigure the entrance panel by using the installer
menu. This menu is also used to enter the electronic directory.
The installer menu is accessed from the keypad of the entrance panel itself by keying in a MASTER code
The entrance panel leaves the factory with a MASTER code (factory default MASTER code) which allows you to open the menu. It is possible to
change this MASTER code in the installer menu.
Note: In order to prevent unauthorised persons from accessing this menu, we recommend that you replace the factory default MASTER code with
your own MASTER code. You can choose any number between 1 and 99999. See page 33.
2 - W I R E
D O O R
E N T R Y
S Y S T E M S
Tabla de contenido
