Idiomas disponibles
Idiomas disponibles
3.
Remove the wall plate template
CAUTION:
Be sure the anchors are seated flush with the concrete surface.
4.
Install wall plate
using three lag bolts and three washers (use only the lag bolts and washers from the Concrete Installation Kit*). Tighten
17
the lag bolts only until the washers are pulled firmly against the wall plate.
CAUTION:
Avoid potential personal injury or property damage! All three lag bolts MUST BE firmly tightened to prevent unwanted
movement of the wall plate
*
Contact Customer Service at 1-888-333-9952 to have the Concrete Installation Kit shipped directly to you.
3
*
and insert three anchors (Fischer UX 10 x 60R - included in the Concrete Installation Kit*).
16
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
17
4
17
*
11
