Rane AM2 AUTOMIXER Guia Del Usuario página 6

Example
HAL Multiprocessor
AM1 Automixer
AM2 Automixer
AM2 Automixer
Items not listed under
Features
Front Panel
1. Mic Input Level Controls: Adjust the mic input gain. The green Signal indicators denote audio
presence. Overload (OL) indicators warn of excessive signal levels.
2. Main Output Level Control: Adjusts the level of the mix exiting the XLR output and the RAD Port
output. When connected to an AM1 or AM2 Cascade In port, the AM2 Output Level only affects
the XLR Output.
3. Cascade In, Cascade Out and RAD Status Indicators: Prove that proper cable termination and
device configuring has occurred when all four indicators illuminate, when the AM2 is connected to
an AM1 or other AM2s. If any of these are off or flashing, a configuration or wiring error is the
culprit. See the Operation
4. Locate Indicator: Helps system installers identify a specific AM2 Automixer when using Rane's
Mongoose Tracker or Halogen software.
5. Power Indicator: Lights whenever adequate power is applied to the unit.
6
Introduction > Box Contents
section for details.
are sold separately.