3) To position the front roller in the correct posi-
tion, remove the 4 lower elastics (Fig.4).
4) Slacken the drive belt by making it come off the
respective front and rear guides (Fig.5 and 6)
5) Undo, but not completely (max. 3-4 complete
turns,) the front support fixing screws (Fig.7 and
8), using the hex key supplied.
6) Repeat the same operation on the opposite side
(Fig.9 and 10)
4
5
7) After releasing the mechanism, move the
6
roller back or forward as required. This opera-
tion must be carried out by lifting the roller just
enough in order to pass each single seat
(Fig.11).
7
GB
8
9
10
11
17