Package Contents; How To Use; Cleaning And Maintenance - Miroco MI-MF002 Guia Del Usuario

Package Contents

1 x Miroco Milk Frother (Model: MI-MF002)
2 x Whisks
1 x Cleaning Brush
Specifications
Model MI-MF002
Input AC 120V 60Hz
Power 400W
Capacity 240 ml / 8.1 oz Max
≥0.65m / 25.6 in
Cable Length
Working Time 310 seconds max

How to Use

MAX
MAX
MIN
1. Add an appropriate amount of milk into
2. Press the Power Button to start frothing /
the pitcher, cap on the lid. Connect to a
power source, the product is in stand by
mode now with a beep.
heating.
Operation LED Indicator
1 Press Lights up in red
st
2 Press Lights up in red
nd
3 rd Press Lights up in red
4 Press Lights up in blue
th
Note:
1. The LED indicator will light up accordingly when working and start
flashing then turn off with 3 beep sound when the process is completed.
2. Milk will warm up once frothed.
3. It is recommended to use whole milk (Fat content>3%) for better result.
4. The frother can heat the milk up to 65 ± 5°C / 149 ± 41°F
5. There will be a small amount of frothing once the milk is heated.

Cleaning and Maintenance

1. Always disconnect the appliance from power after use and before cleaning.
2. Never immerse the power base and cord in water or expose them to moisture.
3. Clean the pitcher with the included cleaning brush or a soft cloth, never use
hard nylon brush or metal brush to avoid scratches. Do not use a brasive
cleaner.
4. To clean the lid, remove it from the pitcher, separate the lid and the silicon
ring, clean under tap water.
5. Rinse the whisk with clean water and wipe it dry, store it in a safe place.
6. Do not wash the unit in dishwasher.
Function
Frothing and heating
densely textured foam
Frothing and heating
fluffy foam
Heating only
Frothing cold milk
03/04