Ubiquiti Bullet Guia De Incio Rapido página 3

English
Typical Deployment
Bullet PicoStation
2
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE on PoE Adapter
LAN or Computer to
Ethernet Port labeled
LAN on PoE Adapter
Note:
used for all wired Ethernet connections and should be
grounded through the AC ground of the PoE.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the customer's responsibility to follow local country regulations, including operation
within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
Default IP Address
192.168.1.20
POE
LAN
Shielded Category 5 (or above) cabling should be
NanoStationloco
Connect the Power Cord
to the PoE Adapter and
Host Computer IP Address
192.168.1.x
Typical Deployment
NanoStation
a power outlet
1