SunTech RP-DS800 Manual Del Usuario página 18

USING THE INTELLIGENT CHARGING FUNCTION
With radio off, install 3 x UM3 (AA) rechargeable batteries
and then press & hold the [
" " displays to activate the built in charging function.
1. Use any 5V external adaptor with USB plug to
connect this radio, the symbol "
the bottom to top during power charging. It stops when
batteries are fully charged.
2. You can also use any USB cable to connect the radio
with your PC for charging.
Connect USB 5V to external
power sources
Notes for charging power:
1. Insisting to use up all power of rechargeable batteries
before charging again, this could extend the life time of
battery and keeping them in good conditions.
2. 3 pcs of batteries to be used as a group and don't
separate them to other usage. Also don't mix to use
batteries with different power capacity.
Caution: Don't charge on any non-rechargeable batteries in
the radio, this will cause a hazard or damage to your radio.
18
RP-DS800 ENGLISH MANUAL
] key with "
" will advance from
" &