Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
AC Power
Junction Box
Wiring
DMX Linking
DMX Connection
Signal Wiring
DMX Junction
Box Wiring
From
Fuse
Panel
Distribution
The Ilumiline 21g2 IP Optic WW will work with a DMX controller using a
regular DMX serial connection. A DMX Primer is available from
www.iluminarc.com.
This product provides a DMX 512 connection by using bare-ended
IP66-rated signal cable. This cable comes connected to the product. See the
User Manual to connect and configure for DMX operation.
To provide the signal, you have two options:
·
Connect the bare-ended IP66-rated signal cable from the product to two
IP66-rated signal connectors (DMX In and DMX Out).
·
Use an IP66-rated junction box and IP66-rated conduit.
The signal cable must match or exceed the electrical characteristics of
the Belden 9841 cable for EIA RS-485 applications. You can also use
CAT 5, CAT 5e, or CAT 6.
Signal In
Junction Box
Ilumiline 21g2 IP Optic WW QRG
L :
Black
N :
White
G :
Green
Conduit
Box
1: Common (Shield)
2: Data – In (Black)
3: Data + In (White)
4: Data – Out (Green)
5: Data + Out (Red)
Conduit
3
Distribution
Box
Signal Out
Junction Box
To
Other
Boxes
Tabla de contenido
