Guided Tour - Rear Panel
FUSE
1. Fuse holder - Insert a 3 amp, 250 volt fuse here for 115 volt operation. We recom-
mend the use of slow-blow fuses.
2. Speaker output - The internal speaker is normally connected to this standard
unbalanced 1/4" jack; if desired, external 8 ohm speakers can be substituted, though
this is not recommended.
WARNING: Because of the high power levels and low frequency content of the signal
generated by the HS1200, we recommend the use of the provided internal speaker
only. If you do wish to connect an external speaker, use only appropriately rated 8
ohm speaker cabinets that are specifically designed for bass instruments.
8