VONROC S CS501DC Traducción Del Manual De Instrucciones Original página 10

EN
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN62841; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work pat-
terns.
DESCRIPTION
The numbers in the text refer to the diagrams on
page 2-4.
1. Lock-off button
2. On/Off switch
3. Laser switch
4. Auxiliary handle
5. Laser
6. Scale for bevel angle
7. Wing bolt for bevel angle
8. Cutting mark, 45°
9. Cutting mark, 0°
10. Wing bolt for parallel guide
11. Handle
12A. Vacuum connection
12B. Vacuum adapter
13. Lever for retracting lower guard
14. Upper guard
15. Clamping bolt
16. Clamping flange
17. Baseplate
18. Lower guard
19. Battery unlock button
20. Battery
21. Spindle lock
22. Wing bolt for depth adjustment
23. Scale for depth adjustment
24. Parallel guide
25. Laser adjustment screw
26. Battery LED indicators button
27. Battery LED indicators
10
28. Charger
29. Charger LED indicators
3. ASSEMBLY
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Inserting the battery into the machine (Fig. B, E)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
1. Insert the battery (20) into the base of the ma-
chine as shown in Fig. E.
2. Push the battery further forward until it clicks
into place.
Removing the battery from the machine (Fig. B, E)
1. Push the battery unlock button (19)
2. Pull the battery out of the machine like shown
in Fig. E.
Checking the battery charging status (Fig. F)
• To check the battery charge status, push the
button (26) on battery shortly.
• The battery has 3 lights indicating the charge
level, the more lights that burn, the more char-
ge the battery has left.
• When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
Charging the battery with the charger (Fig. F)
1. Take the battery (20) from the machine.
2. Turn the battery (20) to upside down position
and slide it onto the charger (28) as shown in
Fig. F.
3. Push the battery until it is fully pushed into the
slot.
4. Plug the charger plug into an electrical outlet and
wait for a while. The LED indicators on the charger
(28) will lighten up and show the charger status.
WWW.VONROC.COM