Silencing Acoustic; Module Line Test; Line Test - Duran Electronica 203 PLUS Serie Manual De Instalacion Y Uso

SILENCING ACOUSTIC

1. Press SILENCE ACOUSTIC
Ventilation, Alarm and Fault Levels. The ACOUSTICS OFF Led will light up to
confirm it.
2. Press SILENCE ACOUSTIC
OFF Led will light off.

3. MODULE LINE TEST

To carry out a module line test:
1. Make sure the module line is at ON position (connected).
2. Press TEST MODULE/LINE
display:
An acoustic signal and the ventilation and alarm outputs will be activated and all the Leds
will light up in the meantime.
In equipments with double speed ventilation, the following messages will also appear on
the display:
Once the test is over, the equipment will automatically change to reading mode.
In equipments with Portuguese Standard

4. LINE TEST

To carry out a test on the line:
1. Make sure the module line is at OFF position (disconnected).
2. Press TEST MODULE/LINE
46
© 2011 DURAN ELECTRONICA S.L.
All rights reserved · www.duranelectronica.com
to disconnect the acoustic signals of the
again to reconnect them. The ACOUSTICS
and the following messages will appear on the
will be
and the following will appear on the display