Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. USAGE
The electromotive, height-adjustable tables are designed for workstations in dry work environments only
(0-40°C; 20-90% relative humidity). The table height is infinitely adjustable, so that it can be set to the most
ergonomically suitable working level.
They have not been designed for other purposes than those included in this manual, e.g. they are not to be used
in areas of high humidity or dampness, nor for lifting people. Any other use is at one's own risk!
Liability: The manufacturer accepts under no circumstances warranty claims or liability claims for damages
arising from improper use or handling of the table frame other than that described in this operation manual.
3. SETUP AND INSTALLATION
•
When the table has been assembled (see assembly directions in CHAPTER 13) the adjustable feet are adjusted
so that the table is level and does not shift.
•
Then the table is connected to the 100-240 VAC outlet and the table is ready for use.
•
Make sure that no cables can get jammed.
4. MAINTENANCE AND DEFECTS
•
The table does not require any maintenance by the user as described in chapter 2 in the directions for use.
•
The table is only to be cleaned with a wrung cloth.
•
In the event of the occurrence of jarring sounds during operation, STOP using the table and please contact
the dealer.
5. OPERATION
Push the buttons to operate up or down.
6. TECHNICAL DATA
Frame, materials:
Steel, Powder lacquered / Chrome
Weights:
23 kg (Packaging total 25 kg)
W
120-200cm
D
70-120 cm (depends on top shape).
H (frame)
63-123 cm
V (speed)
32mm/sec. (unloaded).
F
= Max. load:
100 kg (on frame)
MAX
Duty cycle:
10% by 50% of max load on frame or max 2 min. continuously
Operation:
Micro switches
Voltage:
100-240 VAC / 50/60Hz
Standby Consumption: < 0,5 Watt
Standards:
EN527-1, EN527-2, EN527-3 in relevant categories.
Above specifications may vary depending on local temperature, humidity and input voltage.
W
D
H
F
MAX
3
Tabla de contenido
