Harman JBL Radial Manual Del Usuario página 9

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 31
SYMPTOM
SOUND QUALITY
Too much bass or treble
JBL Radial emits a loud hum
or buzzing noise.
Speaker system experiences
radio frequency interference
or picks up a radio station.
950-0113-001
POSSIBLE PROBLEM
JBL Radial is being overdriven
by an amplifi ed audio source.
Volume level may be too high
Check the EQ setting on your
iPod or source device.
Input cables not plugged in
properly.
Input cable may be picking up
interference.
SOLUTION
Ensure that the JBL Radial is
connected to an appropriate
source device.
Make sure that all signal
cables are inserted snugly into
receptacles.
Check volume of source
device.
Some devices will distort the
output signal if the volume is
set to maximum.
JBL Recommends that the
source device EQ be set to
fl at or OFF
Check input cable connection.
Wrap up excess input cable
in order to make as short as
possible.
8
NOTE
®
JBL
Radial Manual
Tabla de contenido
loading

Tabla de contenido