Getting Started; Using The Play Golf Mode - Bushnell NEO Ghost Manual Del Usuario

GETTING STARTED

1. First, be sure the battery has a full
charge. If you are using it for the first
time, it should be charged until full
(see pg. 6). Next, make sure you are
outdoors, in a location with a clear
view of the sky overhead, to ensure
good reception of GPS satellite signals.
Now, you're ready to power up and use
your NEO Ghost.
2. Press and hold the PWR button on the
top side of the unit until it powers on
(start screen as shown on right). Press
and hold again to turn off the power.
3. To turn on the backlight after the unit
is powered on, briefly press and release
the PWR button.
4. The display will show the Main Menu
(from the time & date display screen,
press the MENU button on the right side),
with a choice of two operating modes:
PLAY GOLF or SETTINGS.

USING THE PLAY GOLF MODE

Highlight PLAY GOLF and press the
1.
SELECT button. Display will show
"SEARCHING" , then SELECT COURSE.
2. Use the UP/DOWN buttons to select
(highlight) your course from list of
nearby courses (closest distance at
top), then press SELECT.
3. The display will show "LOADING", then:
Current hole # (at upper left), Par for
the hole (upper right), and distances
to the center (large number at center
screen), front (lower left) and back
(lower right) of green. (see next page)
8