Prior To Use; The Correct Installation Location - Targa LSHB 150 B1 Manual Del Usuario E Información De Servicio

7. Prior to use

Remove the outdoor halogen spotlight and the installation materials from
the packaging.
Check the outdoor halogen spotlight for signs of damage. If it is damaged,
the outdoor halogen spotlight must not be used.
Only use halogen light bulbs with R7s J78 base and a
maximum power of 150 watts!
The halogen light bulb (9) is stored within the spotlight so that it can be
transported safely. Loosen the screw (1) with a Phillips screwdriver and
carefully open the front pane (10). Take the packaging with the halogen
light bulb (9). Open the packaging, remove the halogen light bulb (9) and
press it into one side of the bulb fitting in order to then insert it into the
other side. When doing so, do not handle the halogen light bulb (9) by its
glass body. The bulb should only ever be handled with a cloth. Close the
front pane (10) now and tighten the screw (1) again.

7.1. The correct installation location

Select the installation location carefully and prepare well for the
installation.
 Place all individual parts, required tools and installation material so
they are well arranged and ready to hand.
 The outdoor halogen spotlight may be mounted only on stable
substrates, for example, brickwork.
 Do not install the outdoor halogen spotlight above a heat source or in
the immediate vicinity of other light sources. When selecting the
installation location, also pay attention to the illustration [D] on the
inside cover.
 Select the installation location so that the outdoor halogen spotlight is
protected against wind, rain and dirt.
 Find out in advance which installation material is suitable for the
installation location you selected. Suitable installation material for
concrete is included with the outdoor halogen spotlight.
LIVARNO LUX LSHB 150 B1
English - 27