Deleting An Activation Code; Setting A Slave Password For Changing Activation Codes Only; Changing A Previously Stored Activation Code - Urmet Alpha Manual De Instalación

Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.

DELETING AN ACTIVATION CODE

Access programming mode.
Enter confi guration code 99 nn where:
99 identifi es the function code to be deleted
nn defi nes the code memory location; possible values from 01 to 22.
Press to confi rm.
The device generates 3 confi rmation beeps and the button
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.
SETTING A SLAVE PASSWORD FOR CHANGING ACTIVATION
CODES ONLY
The code edit password may only be used to edit the activation codes without accessing programming
mode.
Enter programming mode to set the SLAVE password.
Enter confi guration code 36 xxxxxxxx where:
36 identifi es the password change code for changing the codes
xxxxxxxx defi nes the new password which will replace the one used to access programming mode
(from 3 to 8 digits).
Press to confi rm.
The device generates 3 confi rmation beeps and the button
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
Either hold pressed for at least 5 seconds or leave the device inactive for more than 30 seconds to quit
programming mode.
The red button turns blue, the device will generate a long confi rmation beep and then return to normal
operation.

CHANGING A PREVIOUSLY STORED ACTIVATION CODE

Press , ,
Enter the password for changing the activation codes only.
Press to confi rm.
The device generates 3 confi rmation beeps and the button
Enter confi guration code 90 oooo where:
90
identifi es the code change function code
oooo
is the old activation code
Press to confi rm.
Enter the new activation code (from 3 to 8 digits).
Press to confi rm.
The device generates 3 confi rmation beeps and the button
If the entered code is wrong, the device will generate one long beep and wait for the correct code to be
entered.
DS1168-024A
in sequence.
turns from red to blue to red.
turns from red to blue to red.
turns from blue to red.
turns from blue to red.
11