Key On, Engine Off (Koeo); Key On, Engine Running (Koer); About Scan History Function; Viewing The Obd-I (Ford) Vehicle - AutoXray CodeScout 2500 Manual De Usuario

OBD-I VEHICLES (Ford)

Key On, Engine Off (KOEO)

Press the READ button to display the read menu. Select KOEO self-test, press
ENTER and follow the on screen instructions. Once the test starts, the screen
displays the current status (number of codes found, etc). A typical KOEO self test may
take several minutes to complete.
If the KOEO self-test is successful, the Save
Vehicle Scan question is displayed (Fig.21),
followed by a summary screen containing the
results of the scan.
If the KOEO self-test was not successful, the
Reading Failed screen is displayed (Fig.22). If
this happens, refer to the Troubleshooting section
of this manual.

Key On, Engine Running (KOER)

NOTE: The KOEO self-test must be completed
before the KOER self-test can be started.
Press the READ button to display the read menu. Select KOER self-test, press
ENTER and follow the on screen instructions. Once the test starts, the screen
displays the current status and any conditions that the test requires. A typical KOER
self-test may take several minutes to complete.
If the KOER self-test is successful, the Save Vehicle Scan question is displayed
(Fig.21), followed by a summary screen containing the results of the scan.
If the KOEO self-test is not successful, the Reading Failed screen is displayed
(Fig.22). If this happens, refer to the Troubleshooting section of this manual.
20
At the conclusion of a successful vehicle scan, the vehicle configuration and scanned
data information can be saved for later reference (Fig.21). A tag name is entered that
is used to identify the scan at a later time (Fig.23).
Fig.23
Fig.21
Before you start, you must complete Reading your OBD-I (Ford) Vehicle. To view
codes at any time, press MENU, select VIEW CODES and press ENTER. The
CodeScout does not need to be connected to the vehicle to view the data. The
vehicle data remains in the memory until a vehicle is read again. This allows you to
review the data at a later time or to use EZ-PC to load the data into a computer.
Fig.22
When viewing the OBD-I Ford vehicle data, press the left and right arrow buttons to
navigate forward and backward through the list of stored codes. The code number is
displayed at the top of the screen, and supporting text is displayed at the bottom of
the screen. If the entire supporting text does not fit on the screen, pressing the UP
and DOWN arrow buttons scrolls through the text.
OBD-I VEHICLES (Ford)

About Scan History Function:

Up to 10 characters can be used for the name. To
recall a saved scan refer to "Viewing the OBD-I
(Ford) Vehicle" in this manual.

Viewing the OBD-I (Ford) Vehicle

21