Installing The Wireless Device (Optional) - Health O Meter BCS-G6 Serie Instrucciones Para El Usuario

Installing the Wireless Device (optional)

If you have purchased the wireless option for your BCS-G6, in addition to your scale and
hardware, you will also receive the following:
a. TP Link Antenna Model TL-WN822N
b. Antenna Bracket
c. Mini USB Cable
d. SD Card with Wireless Drivers
Make sure that the scale is off, then use the following steps to install the antenna to your scale.
(See illustrations on the following page.)
1. Remove the film from the double-side type on the back side of the bracket.
2. Place the bracket about 2 inches below the ON/OFF switch on the stem.
3. Place the antenna into the bracket. Make sure the green indicator window is visible.
4. Connect the antenna to the USB port of the scale base using the provided Mini USB
cable.
5. Install the SD card included in the wireless package.
13