Tabla de contenido
Idiomas disponibles
Idiomas disponibles
INTRODUCTION
The programmable Preheater, PCT-1000, features digital controls, four time-
programmable heating zones and one cooling zone that utilize a built-in thermocouple
(TC) for accurate feedback control. The PCT-1000 can also be used to provide a single
continuous source of constant heat. The external TC i/p function can be used as a
feedback control mechanism for accurate profiling of your circuit boards. Additionally,
this unit may be connected to the HCT-1000 as part of the Modular Rework System
(MRS). The MRS comprises the PCT-1000 Programmable Preheater, HCT-1000
Programmable Hot Air Tool, BH-2000 Board holder and, ATH-1100A Adjustable Tool
Holder.
CONTENTS
1.
Specifications
2.
Symbol Definitions
3.
Connecting the Unit and Quick-start
4.
Operating Instructions
5.
Additional features
6.
Troubleshooting
7.
Warranty
8.
Safety
1. PCT-1000 SPECIFICATIONS
Size
Weight
Input Voltage
Rated Power
Operating Temperature
Storage Temperature
Temperature Range
Max. Relative Humidity
Airflow
Modes
Display
Number of Programs
Number of Zones
330mm X 203mm X 76mm (13" X 8" X 3")
3.4kg (7.5lbs)
100-230VAC
1200W
0°C to 50°C (32°F to 122°F)
-10°C to 60°C (14°F to 140°F)
25°C to 400°C (77°F to 752°F)
80% for temperature up to 31°C (87.8°F) Decreasing
linearly to 50% relative humidity at 40°C (104°F)
19 cfm
Run, Setup: Manual, Setup: Teach
LCD 20 X 4 display segments
50 memory locations
5 (4 Heat Zones, 1 Cool Down Zone)
1
Page
1
2
3
3
5
5
5
6
Tabla de contenido
