Care And Maintenance - Baby Jogger CITY TOUR 2 carry cot Instrucciones De Uso

MOUNTING ADAPTERS
EN
1 Before attaching anything to the
accessory mounting slots, make
sure the elastic fabric near the
accessory mounting slots are not
covering the slots.
2 Insert the ends of the mounting
adapters into the accessory
mounting slots. The mounting
adapters are secure when they click
into place.
3 To remove the mounting adapters,
push the gray release button on
each side of the mounting slots and
pull the adapter upwards.
UNFOLDING
4 From underneath the Carry cot
body, pull the straps on each side of
the carry cot body until the straps
click into place. Assure that the
mechanism is engaged properly by
slightly pressing on the upper frame.
5 Attach the straps to the fastening
strips to keep them secure.
FOOT COVER
6 To attach the foot muff, place the
foot muff over the Carry cot frame.
7 Attach the fastening strips on either
side of the Carry cot body and on
the front.
8 Attach the snaps on either side of
the canopy.
CANOPY
9 Raise the canopy until it clicks into
place.
WARNING: Before carrying or lifting,
make sure that the canopy is locked
into place.
10 To lower the canopy, push the
canopy down.
CARRY STRAPS
11 To use the carry straps, first place
the ends of both straps into the
carry handle. Then close the
handle around the straps using the
fastening strips.
12 To store the carry straps, undo the
fastening strip inside each pocket
and insert the carry strap into the
pocket.
WARNING: DO NOT store anything
except the carry handles inside the
storage pockets. ALWAYS store the
carry handles inside the storage
pockets when the carry handles are
not in use.
ATTACH TO STROLLER
13 First, recline the backrest by
pinching the clamp behind the
backrest, and slide it down to the
lowest position.
14 Pull backrest down on both sides to
match the clamp position.
WARNING: When making
adjustments to the stroller seat,
make sure child' s head, arms, and
legs are clear of moving seat parts
and stroller frame.
15 Align the black attachment
brackets of the Carry cot body with
the mounting adapter brackets.
The Carry cot body can only be
attached rear facing. Firmly press
down on the carry cot body until
you hear it click into place. Gently
pull up on the carry cot body to
ensure it is locked in place.
16 To remove the carry cot body from
the stroller: Lift the release lever on
the back of the carry cot body and
pull upward to remove.
COLLAPSING THE Carry cot
17 Lower the canopy.
18 From underneath the Carry cot
body, remove the straps from the
fastening strips.
19 Pull the strap in the middle of the
carry cot body until the strap clicks
and the carry cot body collapses.

CARE AND MAINTENANCE

Mattress Cover & Foot Cover:
• Remove plastic & foam inserts from
the mattress before washing.
• Machine wash separately using a
warm
gentle cycle and mild detergent.
• Do not bleach.
• Do not iron.
• Do not place fabric in the dryer. Lay
flat to dry.
Carry cot Base, Canopy & Mattress
Pad:
• Wipe clean using a damp cloth.
• Do not bleach.
• Do not iron.
7
EN